G10 epoxy board is widely used for wave soldering pallets and test fixtures. This G10 epoxy board has a low thermal expansion of 24 ppm/°C. The excellent machinability of G10 epoxy board allows tight tolerances (±0.05mm).

A G10 epoxy board with a 6mm thickness provides rigidity for heavy fixtures. The surface hardness of G10 epoxy board reaches Shore D 85. G10 epoxy board with a ground finish serves as a precision reference surface.

G10 epoxy board with a 1.2mm thickness is ideal for card guides. The creep resistance of G10 epoxy board suits reflow oven applications. G10 epoxy board is often used for circuit board hold-downs and assembly pallets.

A G10 epoxy board with a conductive layer dissipates static charge. The modulus of elasticity of G10 epoxy board is 24 GPa for structural stability. G10 epoxy board with drilled holes accepts standard PCB mounting hardware.

Threaded inserts can be bonded into G10 epoxy board for reusable fastening. The low friction surface of G10 epoxy board prevents solder ball adhesion. G10 epoxy board with a smooth finish reduces wear on handling equipment. G10 epoxy board is an economical solution for electronic assembly tooling.